Issue Program Homelink Mirror with Garage

[Oliviacutter]

Hello. I'm having issues programming my homelink mirror with my garage. My other vehicles and exterior garage opener programmed with no issues. I've followed the instruction manual. Anyone else having problems?

 

[DereksAWD]

Follow these steps, it worked for me.

View: https://www.youtube.com/watch?v=xAUYHBc79hQ

 

[DereksAWD]

Similar procedure but different video

View: https://www.youtube.com/watch?v=mvoKBm7h3aY

 

[Oliviacutter]

Thanks! We tried this a few times using the learn button on our garage door opener and it didn't work. I don't have my original garage opener. Thanks for your help!

 

[DereksAWD]

Thanks! We tried this a few times using the learn button on our garage door opener and it didn't work. I don't have my original garage opener. Thanks for your help!

I think if you have a rolling code garage opener you'll need the remote to program the Home link.

 

[Oliviacutter]

Thanks! I found my remote and had to program it. Still no luck with the homelink mirror. Truly appreciate your help!

 

[Davep]

Thanks! I found my remote and had to program it. Still no luck with the homelink mirror. Truly appreciate your help!

What brand do you have and how old is it?

 

[Oliviacutter]

A Chamberlain and it's 12 years old. I thought about that...Our 2013, 2017 and 2016 vehicles works using it....

 

[Gone in 60]

A Chamberlain and it's 12 years old. I thought about that...Our 2013, 2017 and 2016 vehicles works using it....

Maybe this video will help.

View: https://www.youtube.com/watch?v=tKrPXjkjs-g

View: https://www.youtube.com/watch?v=Kicb32wtpxo

 

[Davep]

Looks like Gone in 60 beat me to it with the videos.

After you program Homelink with the remote, you'll still need to push the learn button the garage so that the opener recognizes Homelink as a new remote.

 

[Oliviacutter]

Follow these steps, it worked for me.

View: https://www.youtube.com/watch?v=xAUYHBc79hQ

I think if you have a rolling code garage opener you'll need the remote to program the Home link.

Ok it worked after several tries. I finally found my garage door opener. Thanks so much!

 

[DereksAWD]

Ok it worked after several tries. I finally found my garage door opener. Thanks so much!

Great to hear and you're very welcome.

 

[Bucky Festoon]

I had major issues with programming my Homelink until I cracked this code. (FYI I have 2 Chamberlain/Liftmaster 1/2HP openers).
Start by pushing the Start Button on your vehicle Without your foot on the brake to put it into accessory mode.

1. Reset all buttons on the Homelink by pushing and holding the 1st and 3rd buttons until the light on the mirror/homelink blinks red then release.
2. Assuming you are programming button 1 on the Homelink press and hold button 1, while holding button 1 hold your garage door remote within 3 inches of the mirror/Homelink and push and hold the desired button on the remote until the light on the mirror/homelink blinks fast red (it may blink slowly at first but be patient).
3. Climb a ladder and briefly push the learn button on the garage door opener head/motor (a small program light will come on). WARNING: If you hold the learn button too long you will erase the programming on the door opener head/motor.
4. Within 30 seconds hop in the car and push the desired button on the Homelink. (On my system the light on the Garage door opener head/motor blinks)
5. Test to make sure the desired button works.
6. Repeat steps 2-5 for any additional Homelink buttons you wish to program.

If you don't get the fast red blink in step 2 you may have to put a new battery into the remote.

Hopefully this solves your issues as it did mine!!!

 

[TN_Steve]

I had major issues with programming my Homelink until I cracked this code. (FYI I have 2 Chamberlain/Liftmaster 1/2HP openers).
Start by pushing the Start Button on your vehicle Without your foot on the brake to put it into accessory mode.

1. Reset all buttons on the Homelink by pushing and holding the 1st and 3rd buttons until the light on the mirror/homelink blinks red then release.
2. Assuming you are programming button 1 on the Homelink press and hold button 1, while holding button 1 hold your garage door remote within 3 inches of the mirror/Homelink and push and hold the desired button on the remote until the light on the mirror/homelink blinks fast red (it may blink slowly at first but be patient).
3. Climb a ladder and briefly push the learn button on the garage door opener head/motor (a small program light will come on). WARNING: If you hold the learn button too long you will erase the programming on the door opener head/motor.
4. Within 30 seconds hop in the car and push the desired button on the Homelink. (On my system the light on the Garage door opener head/motor blinks)
5. Test to make sure the desired button works.
6. Repeat steps 2-5 for any additional Homelink buttons you wish to program.

If you don't get the fast red blink in step 2 you may have to put a new battery into the remote.

Hopefully this solves your issues as it did mine!!!

This totally worked!! I just a new SX Prestige and have programmed Homelink with my other cars and didn’t have to do steps 1 and 2 but Kia apparently you do. Thanks!!

 

[Rhalama]

I have a 2024 Telly EX-X and it did not come with homelink for the garage door opener. I found one at a Kia parts place, installed it my self and great except for 1 thing. I use 2 buttons, one for the front gate and one for my garage. Problem occurs when its dark out. The buttons are not lit so I can't see whick button I am pushing. I tried with the overhead lights on---nope-----put scotchtape over the buttons and painted button with luminous paint. Problem is you need to "recharge" the paint with sun light. My car is parked in the garage--no sun light. Anyone have any suggestions?