Remove front bumper

[Earl the Pearl]

any tricks out there in popping out the clips when removing the front bumper cover?

I removed all hardware and watched videos but didnt want to break the side clips by the wheel well

thanks
Paul

 

[Earl the Pearl]

I got it. It was easy once I found out there is one screw positioned almost vertical that holds the cover near the wheel well, and there also is a bolt below that one that is at a 45 deg angle. this is same on each wheel well. With these out and the rest of the obvious bolts and clips, the bumper comes out very easy by pulling gently on the edges by wheel.