• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 KIA Telluride Forum and KIA Telluride community dedicated to KIA Telluride owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the KIA Telluride Forum today!


Does the Telluride require engine break-in?

Messages
244
Likes
73
Location
Bristol, WI
#2
From the Owner's Manual.


No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000km) you may add to the performance, economy and life of your vehicle.

Do not race the engine.
  • While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
  • Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine.
  • Avoid hard stops, except in emergencies, to allow the brakes to seat properly.
  • Don't tow a trailer during the first 1,200 miles (2,000 km) of operation.
 
Messages
5
Likes
0
Location
Duluth, MN, USA
#10
From the Owner's Manual.


No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000km) you may add to the performance, economy and life of your vehicle.

Do not race the engine.
  • While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
  • Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine.
  • Avoid hard stops, except in emergencies, to allow the brakes to seat properly.
  • Don't tow a trailer during the first 1,200 miles (2,000 km) of operation.
You said there's no break-in period and then proceeded to explain what the factory break-in period is. Yes, there is a break-in period.
 

maxford

New Member
Messages
14
Likes
4
Location
Seattle
#12
Taking delivery on Thursday in Denver. Beginning a drive to Seattle on Friday. What should I do or not do for the engine break in? Not use cruise control? Alternate speeds every x minutes? Dealer is saying no break in is needed but for $50k, I don't want to risk an issue down the line.
 
Messages
34
Likes
15
Location
Mauldin, SC, USA
#13
Taking delivery on Thursday in Denver. Beginning a drive to Seattle on Friday. What should I do or not do for the engine break in? Not use cruise control? Alternate speeds every x minutes? Dealer is saying no break in is needed but for $50k, I don't want to risk an issue down the line.
Just dont use cruise control for long periods of time. I am in the same boat. I am driving out to Colorado next week to trade my 20 S for a 22SX. So I have about 1500 miles to get it broke in. Guess I will just fluctuate speed with the foot on the pedal rather than set a desired speed
 
Messages
39
Likes
8
Location
Janesville, WI, USA
#14
I know many folks will do their first oil change within the first 1,500 miles to get any small metal shavings that may occur in the oil pan out during break in. Something to think about.
 
Messages
5
Likes
0
Location
Duluth, MN, USA
#15
Just dont use cruise control for long periods of time. I am in the same boat. I am driving out to Colorado next week to trade my 20 S for a 22SX. So I have about 1500 miles to get it broke in. Guess I will just fluctuate speed with the foot on the pedal rather than set a deaired speed
Yes!! My dealer didn't say a thing about the break in period (which is clearly mentioned in the owner's manuals) and so I drove 900 miles on cruise!! Later, I asked him to tell future clients.
 


Top